How to Improve the Molding Rate of Charcoal Machines ?

Suote Hongfa is a professional Charcoal Machine equipment manufacturer under the Shougang Tegang Group. Recently, many customers have had questions about the difficulty of Mechanized Charcoal molding. So how can the molding rate of Mechanized Charcoal be ensured? Suote Hongfa provides you with methods to improve the molding rate.

   The Briquetting Machine is the key link in the charcoal-making process. The pitch of the screw propeller must be properly set, and the angle must be in the correct position. The moisture content of the raw material, i.e., the water content, should generally be maintained at 8%-12% for optimal results. The particle size of the raw material: if the particles are too large, phenomena such as "material fluffing" and "blowout" will occur. Therefore, the particle size should generally be between 40-60 mesh, making material molding easy and resulting in rods with relatively higher density. The selection and combination of raw materials: some raw materials need to be mixed with other materials for adjustment in the early stage, and should be reasonably combined based on your own raw material conditions. Currently, we mainly use China fir, and I use 20%-30% mixed wood raw materials for combination. The density of rods produced by the Charcoal Machine is relatively high in this case. The impact of Mechanized Charcoal raw material moisture on Mechanized Charcoal: the moisture content of Mechanized Charcoal raw materials has the greatest impact on the finished Mechanized Charcoal during production. Therefore, Suote Hongfa Biomass Charcoal Machine reminds you that when using a Charcoal Machine to process charcoal, you first need to check the moisture level of the raw materials. If the raw material moisture is too high, Shenzhou recommends using drying equipment to dry the raw material until it reaches a moisture content of 10% before briquetting. If the raw material moisture is too high, it will cause molding difficulties, and the low density of the briquettes will lead to a decline in Mechanized Charcoal quality. Therefore, when producing Mechanized Charcoal, you must ensure the moisture content of the raw materials to improve the quality of the finished Mechanized Charcoal. By mastering these aspects, briquetting should no longer be a difficult problem. If you have any needs, please feel free to contact our company frequently. Consultation hotline: 010-59796338.