After people purchase a new Charcoal Machine, the first thing they think of is debugging the machinery, checking whether the Charcoal Machine equipment functions normally, then using raw materials for preliminary production trials. Some impatient customers, after the machine arrives at the site, directly use raw materials for charcoal processing, on one hand to check the functionality of the Charcoal Machine equipment, on the other hand to observe the discharge degree, and quickly enter the production state. We Can understand this kind of心情 (feeling), but when new customers do not have a thorough understanding of Charcoal Machine equipment usage, blindly starting the machine and blindly putting into production, encountering problems in production and then going to understand and solve problems, under such circumstances, phenomena that Can be avoided often occur, also causing unnecessary losses to customers. This is the phenomenon that Suote Hongfa Machinery least wants to see. Suote Hongfa Machinery has summarized some methods about correct machine debugging and proper use, to help new customers Can extend the use of Charcoal Machine.
 Correct Startup and Debugging Method for Newly Purchased Charcoal Machine:
1. Ensure all connecting screws of the charcoal pelletizing machine are tightly fastened, especially the three dead stops inside the heating cylinder, which Must be tightly secured.
2. After ensuring stable equipment installation, Need to check all lubrication parts of Briquetting Machine, Wood Chips Crusher, airflow Dryer and other equipment and add gear oil to ensure smooth equipment operation.
3. Connect the main control box power and install standard safety wiring. At this time, do not rush to start the machine. Can run idle for three to five minutes to check if any abnormal phenomena such as jamming or collision occur. If not, it Can be normally put into production use. If any of the above situations occur, immediately stop the machine for Conduct inspection and thoroughly eliminate the fault.
4. New machines Need to ensure the equipment warms up slowly. Only after the temperature rises Can the machine be started and material fed into it.
5. In the feeding process, remember not to be too fast. When the charcoal pelletizing machine equipment has been working normally for 30 minutes, it Can be turned off. At this time, Expressed trial run has been successful, and normal production Can be conducted.
 以上五点看似简单的操作，却Can助力新客户对Charcoal Machine使用的掌握，更能延长Charcoal Machine设备的使用寿命，看似简单的道理，Need长期的坚持，Suote Hongfa机械祝新购Charcoal Machine客户安全生产，事业兴隆。